Removing an XBee network deletes it from Remote Manager. The physical Wi-SUN network is not affected: border routers and nodes remain connected and continue to operate.

If the network’s border routers had Authorization set to Digi Remote Manager, new devices can no longer join the network until you change the setting on each border router to a different authorization mode.

Remove an XBee network

To remove an XBee network from Remote Manager:

  1. Log in to Remote Manager.

  2. Click XBee Networks in the left navigation.

  3. Select the network to remove.

  4. Click Actions.

  5. Click Delete.

  6. Click Confirm.

You can select multiple networks and remove them all at once by following the same steps.