Sets or displays the power level at which the device transmits conducted power. Power levels are approximate.
| This command is used to Configure the PHY layer. |
Parameter range
0 - 4
| Region | PL 0 (dBm) | PL 1 (dBm) | PL 2 (dBm) | PL 3 (dBm) | PL 4 (dBm) |
|---|---|---|---|---|---|
NA (ATR? 1) |
0.1 |
5.5 |
11.0 |
14.0 |
20.0 |
EU (ATR? 3) |
0.1 |
5.5 |
8.0 |
10.0 |
14.0 |
IN (ATR? 5) |
0.1 |
5.5 |
8.0 |
10.0 |
14.0 |
Default
N/A
