The ConnectCore 8M Nano must be soldered to a carrier board. Digi offers the following robust development platforms for smart connected devices and applications:
See:
Version
- Get started
-
Digi Embedded Yocto
- Release notes
- Application development
- Yocto system development
- Storage layout
- Boot
- Update firmware
- Read-only root file system
- Network failover and recovery
- System monitor
- System watchdog
- Containers
- U-Boot bootloader
- Machine Learning / AI
- Simulate a SOM variant
- Recover your device
- ConnectCore Cloud Services
-
Linux kernel BSP
- Device tree files and overlays
- Pin multiplexing (IOMUX)
- ADC
- Audio
- Backlight
- Bluetooth
- Camera
- CAN
- Cellular
- Cryptochip
- Cryptographic accelerator (CAAM)
- Ethernet
- GPIO
- I2C
- Micro Controller Assist (MCA)
- MMC/SD/SDIO
- OTP bits
- Power management
- PWM
- RAM layout
- Real-Time Clock (RTC)
- SPI
- Thermal monitor
- Touch screen
- UART
- USB
- Video
- Watchdog
- Wi-Fi
- XBee sockets
- Digi TrustFence for Yocto
- Digi ConnectCore Smart IOmux
- Hardware
- Additional resources
Custom carrier board
