Embedded
  • Nav
ConnectCore 6 Plus
Version
  • Get started
    • Step 1 - Requirements
    • Step 2 - Set up the hardware
    • Step 3 - Program the Yocto firmware
    • Step 4 - Create your first applications
    • Next steps
  • Digi Embedded Yocto
    • Release notes
      • Release changelog
      • Known issues and limitations
      • Support contact information
    • Application development
      • Digi ADE
        • Set up the development environment
        • Create a C/C++ project
        • Customize project build options
        • Build a project
        • Launch remote applications
      • Qt Creator
        • Install Qt
        • Configure Qt Creator
        • Create a Qt quick application
      • Command line
        • Install a pre-compiled toolchain
        • Create and build a "Hello world" application
        • Launch the application
      • Recovery library (firmware update)
      • Digi APIx for embedded
        • Set up your project for Digi APIX
        • ADC API
        • CAN API
        • GPIO API
        • I2C API
        • PWM API
        • Power management API
        • SPI API
        • Watchdog API
        • Define interface aliases
      • Cloud Connector
        • Set up your project for Cloud Connector
        • Start Cloud Connector
        • Receive data from Remote Manager
        • Send data to Remote Manager
        • Typed data - data points
        • Untyped data - binary data points
      • WPE WebKit web browser
        • Build WPE WebKit image
        • Use WPE WebKit
        • Include WebKit in dey-image-qt
      • XBee libraries
    • Yocto system development
      • Set up workstation
        • Set up Linux PC
        • Set up Docker container (Linux)
        • Set up Docker container (Windows)
      • Install Digi Embedded Yocto
      • Create and build projects
      • Boot the system
      • Customize the root file system
        • Configure network settings
        • Manage user accounts
      • Customize the kernel and DT
        • Make permanent changes
        • Make temporary changes
        • Build externally
        • Deploy the kernel on your target
      • Custom carrier board
        • Add a new custom machine
        • Carrier board version and ID
    • Storage layout
      • Change the partition table
    • Update firmware
      • Program firmware using Fastboot
      • Program firmware from Linux
      • Program firmware from U-Boot
    • Dual boot
    • Read-only root file system
    • Network failover and recovery
    • U-Boot bootloader
      • Environment variables
      • Digi U-Boot custom commands
        • Direct boot
        • Firmware update
        • MMC extended CSD register
        • PMIC register access
      • Configuration options
        • Secure console options
      • U-Boot files by variant
    • Machine Learning / AI
      • ConnectCore Voice
      • Google Coral
    • Amazon Web Services (AWS) IoT
      • Get started with AWS IoT
      • Get started with Greengrass
      • Create an AWS IoT image
      • AWS IoT device SDK
    • Digi Remote Manager
      • Connect to Remote Manager
      • Monitor the system
      • Update the firmware with Remote Manager
      • Access the file system
      • Get device information
      • Automate operations
      • Advanced remote configuration
    • Simulate a SOM variant
    • Recover your device
  • Linux kernel BSP
    • Device tree files
    • Pin multiplexing (IOMUX)
    • ADC
    • Audio
      • HDMI audio
      • SGTL5000 audio
    • Bluetooth
      • Bluetooth classic
      • Bluetooth Low Energy
    • Camera
      • Parallel camera
      • MIPI camera
    • CAN
    • Cellular
    • Cryptochip
    • Cryptographic accelerator (CAAM)
    • Ethernet
    • GPIO
    • I2C
    • MMC/SD/SDIO
    • OTP bits
    • PCI Express (PCIe)
    • DA9063 Power Management IC
      • DA9063 power regulators
    • Power management
    • PWM
    • Real-Time Clock (RTC)
    • SATA
    • SPI
    • Thermal monitor
    • Touch screen
    • UART
    • USB
      • Using the USB Host port
      • Using the USB port (as device)
    • Video
      • HDMI
      • LVDS
      • Parallel video
      • GPU
      • IPU
      • VPU
    • Watchdog
    • Wi-Fi
      • Configuration
      • Get started with Wi-Fi
      • Configuration modes
        • Client infrastructure mode
        • Access point mode
        • Wi-Fi Direct
        • Concurrent modes
      • Network bridging
      • Regulatory domains
      • Wi-Fi test mode
    • XBee socket
  • Digi TrustFence
    • Enable TrustFence in DEY
    • Secure boot
      • Digital signature overview
      • Secure boot overview
        • Image authentication
        • Image encryption
      • Set up secure boot
      • Standalone setup
    • Partition encryption
    • SELinux
    • Secure storage
    • Secure JTAG
    • Secure console modes
    • Secure build environments
    • Secure firmware update
    • Summary of TrustFence keys
      • Revoke a key
    • Advanced
      • Manually create a PKI
  • Digi ConnectCore Smart IOmux
  • Hardware
    • Hardware reference manuals
    • Design files
    • SOM variants
  • Additional resources
    • Embedded systems terminology
    • Glossary of cryptography terms
    • Reference materials
ConnectCore 6 Plus
Version
  • Get started
    • Step 1 - Requirements
    • Step 2 - Set up the hardware
    • Step 3 - Program the Yocto firmware
    • Step 4 - Create your first applications
    • Next steps
  • Digi Embedded Yocto
    • Release notes
      • Release changelog
      • Known issues and limitations
      • Support contact information
    • Application development
      • Digi ADE
        • Set up the development environment
        • Create a C/C++ project
        • Customize project build options
        • Build a project
        • Launch remote applications
      • Qt Creator
        • Install Qt
        • Configure Qt Creator
        • Create a Qt quick application
      • Command line
        • Install a pre-compiled toolchain
        • Create and build a "Hello world" application
        • Launch the application
      • Recovery library (firmware update)
      • Digi APIx for embedded
        • Set up your project for Digi APIX
        • ADC API
        • CAN API
        • GPIO API
        • I2C API
        • PWM API
        • Power management API
        • SPI API
        • Watchdog API
        • Define interface aliases
      • Cloud Connector
        • Set up your project for Cloud Connector
        • Start Cloud Connector
        • Receive data from Remote Manager
        • Send data to Remote Manager
        • Typed data - data points
        • Untyped data - binary data points
      • WPE WebKit web browser
        • Build WPE WebKit image
        • Use WPE WebKit
        • Include WebKit in dey-image-qt
      • XBee libraries
    • Yocto system development
      • Set up workstation
        • Set up Linux PC
        • Set up Docker container (Linux)
        • Set up Docker container (Windows)
      • Install Digi Embedded Yocto
      • Create and build projects
      • Boot the system
      • Customize the root file system
        • Configure network settings
        • Manage user accounts
      • Customize the kernel and DT
        • Make permanent changes
        • Make temporary changes
        • Build externally
        • Deploy the kernel on your target
      • Custom carrier board
        • Add a new custom machine
        • Carrier board version and ID
    • Storage layout
      • Change the partition table
    • Update firmware
      • Program firmware using Fastboot
      • Program firmware from Linux
      • Program firmware from U-Boot
    • Dual boot
    • Read-only root file system
    • Network failover and recovery
    • U-Boot bootloader
      • Environment variables
      • Digi U-Boot custom commands
        • Direct boot
        • Firmware update
        • MMC extended CSD register
        • PMIC register access
      • Configuration options
        • Secure console options
      • U-Boot files by variant
    • Machine Learning / AI
      • ConnectCore Voice
      • Google Coral
    • Amazon Web Services (AWS) IoT
      • Get started with AWS IoT
      • Get started with Greengrass
      • Create an AWS IoT image
      • AWS IoT device SDK
    • Digi Remote Manager
      • Connect to Remote Manager
      • Monitor the system
      • Update the firmware with Remote Manager
      • Access the file system
      • Get device information
      • Automate operations
      • Advanced remote configuration
    • Simulate a SOM variant
    • Recover your device
  • Linux kernel BSP
    • Device tree files
    • Pin multiplexing (IOMUX)
    • ADC
    • Audio
      • HDMI audio
      • SGTL5000 audio
    • Bluetooth
      • Bluetooth classic
      • Bluetooth Low Energy
    • Camera
      • Parallel camera
      • MIPI camera
    • CAN
    • Cellular
    • Cryptochip
    • Cryptographic accelerator (CAAM)
    • Ethernet
    • GPIO
    • I2C
    • MMC/SD/SDIO
    • OTP bits
    • PCI Express (PCIe)
    • DA9063 Power Management IC
      • DA9063 power regulators
    • Power management
    • PWM
    • Real-Time Clock (RTC)
    • SATA
    • SPI
    • Thermal monitor
    • Touch screen
    • UART
    • USB
      • Using the USB Host port
      • Using the USB port (as device)
    • Video
      • HDMI
      • LVDS
      • Parallel video
      • GPU
      • IPU
      • VPU
    • Watchdog
    • Wi-Fi
      • Configuration
      • Get started with Wi-Fi
      • Configuration modes
        • Client infrastructure mode
        • Access point mode
        • Wi-Fi Direct
        • Concurrent modes
      • Network bridging
      • Regulatory domains
      • Wi-Fi test mode
    • XBee socket
  • Digi TrustFence
    • Enable TrustFence in DEY
    • Secure boot
      • Digital signature overview
      • Secure boot overview
        • Image authentication
        • Image encryption
      • Set up secure boot
      • Standalone setup
    • Partition encryption
    • SELinux
    • Secure storage
    • Secure JTAG
    • Secure console modes
    • Secure build environments
    • Secure firmware update
    • Summary of TrustFence keys
      • Revoke a key
    • Advanced
      • Manually create a PKI
  • Digi ConnectCore Smart IOmux
  • Hardware
    • Hardware reference manuals
    • Design files
    • SOM variants
  • Additional resources
    • Embedded systems terminology
    • Glossary of cryptography terms
    • Reference materials

Video

  • HDMI

  • LVDS

  • Parallel video

  • Graphics Processing Unit (GPU)

  • Image Processing Unit (IPU)

  • Video Processing Unit (VPU)

Video:

This topic for another platform?

  • ConnectCore 6UL
  • ConnectCore 8X
  • ConnectCore 8M Nano
  • ConnectCore 8M Mini
  • ConnectCore 6
Scroll to top of page
Product page More documentation Official site About Digi Contact us Support
©2025 Digi International Inc. All rights reserved.
Site last generated: Apr 30, 2025
Digi International Inc.