Response Frames:
-
Transmit Status - 0x89: (Only for transmission errors)
Description
This frame type is used to access the file system of a remote XBee module on a Wi-SUN network. See Remote File System IPv6 Response - 0xD3 for File System Commands, their parameters, and response format. The local module will also respond with a Transmit Status - 0x89 frame. If successful, user should expect to see a Remote File System IPv6 Response - 0xD3.
The frame content varies based on the File System Command sent in the request. Payloads for each command and their respective responses (follow below).
Format
The following table provides the contents of the frame. For details on frame structure, see API Frames.
| Offset | Size | Frame Field | Description |
|---|---|---|---|
0 |
8-bit |
Start Delimiter |
Indicates the start of an API frame. |
1 |
16-bit |
Length |
Number of bytes between the length and checksum. |
3 |
8-bit |
Frame type |
0x53 |
4 |
8-bit |
Frame ID |
A reference identifier used to match status responses. If set to 0, the device does not send a response. |
5 |
128-bit |
Detination address |
128 bit IPv6 destination address. |
21 |
8-bit |
Trasnmit Options |
Options for transmission. |
22 |
8-bit |
File System Command |
See File System Commands for valid command values. |
23-n |
variable |
Request Parameters |
Variable content based on File System Command |
EOF |
8-bit |
Checksum |
0xFF minus the 8-bit sum of bytes from offset 3 to this byte (between length and checksum). |
