DO (Device Options) |

A bitfield that contains device options that do not have dedicated AT commands.

Leave unused bits clear so future device options are not inadvertently enabled during a firmware update.

Parameter range

0 - 0xFF

Bit field: Unused bits must be set to 0. These bits may be logically OR’ed together:

Bit

Description

Enable additional join modem statuses. Helpful for debugging purposes.

1, 2

bit 2	bit 1	Description
0	0	Auto selects one of the following based on if the customer certs have been loaded and applied: - Use hardware identity, trust only Digi CA - Use customer identity, trust only customer CA
0	1	Use hardware identity, trust any customer CA
1	0	Use hardware identity, trust Digi CA, and any customer CA
1	1	Use customer identity, trust Digi CA, and any customer CA

Reserved

0x00