Embedded
  • Nav
ConnectCore 8M Nano
Version
  • Get started
    • Step 1 - Requirements
    • Step 2 - Set up the hardware
    • Step 3 - Program the Yocto firmware
    • Step 4 - Create your first applications
    • Next steps
  • Digi Embedded Yocto
    • Release notes
      • Release changelog
      • Known issues and limitations
      • Support contact information
    • Application development
      • Digi ADE
        • Set up the development environment
        • Create a C/C++ project
        • Customize project build options
        • Build a project
        • Launch remote applications
      • Qt Creator
        • Install Qt
        • Configure Qt Creator
        • Create a Qt quick application
      • Command line
        • Install a pre-compiled toolchain
        • Create and build a "Hello world" application
        • Launch the application
      • Recovery library (firmware update)
      • Digi APIx for embedded
        • Set up your project for Digi APIX
        • ADC API
        • CAN API
        • GPIO API
        • I2C API
        • PWM API
        • Power management API
        • SPI API
        • Watchdog API
        • Define interface aliases
      • Cloud Connector
        • Set up your project for Cloud Connector
        • Start Cloud Connector
        • Receive data from Remote Manager
        • Send data to Remote Manager
        • Typed data - data points
        • Untyped data - binary data points
      • XBee libraries
    • Yocto system development
      • Set up workstation
      • Install Digi Embedded Yocto
      • Create and build projects
      • Boot the system
      • Partitioning
        • Yocto eMMC layout
        • Change partition table
      • Update firmware
        • Program firmware from Linux
        • Program firmware from U-Boot
        • Program MCA firmware
      • Customize the root filesystem
        • Configure network settings
        • Manage user accounts
      • Amazon Web Services (AWS) IoT
        • Get started with AWS IoT
        • Get started with Greengrass
        • Create an AWS IoT image
        • AWS IoT device SDK
      • Digi Remote Manager
        • Connect to Remote Manager
        • Monitor the system
        • Update the firmware with Remote Manager
        • Access the filesystem
        • Get device information
        • Automate operations
        • Advanced remote configuration
      • Network failover and recovery
      • System monitor
      • System watchdog
      • Custom carrier board
        • Add a new custom machine
        • Carrier board version and ID
      • Kernel development workflows
        • Build custom Yocto kernel recipe
        • Build standalone/external images
        • Make quick changes in the Yocto devshell
        • Deploy the kernel on your target
    • U-Boot bootloader
      • Environment variables
      • Digi U-Boot custom commands
        • Direct boot
        • Firmware update
        • MMC extended CSD register
      • Configuration options
        • Secure console options
      • U-Boot files by variant
    • Recover your device
    • Enable support for a Fusion display
  • Linux kernel BSP
    • Device tree files
    • Pin multiplexing (IOMUX)
    • ADC
      • Analog comparator
    • Audio
    • Backlight
    • Bluetooth
      • Bluetooth classic
      • Bluetooth Low Energy
    • Camera
    • CAN
    • Cellular
    • Cryptochip
    • Cryptographic accelerator
    • Ethernet
    • GPIO
    • I2C
    • Micro Controller Assist (MCA)
      • MCA core functionality
      • MCA configuration tool
      • MCA I/O pads
      • MCA GPIO
      • MCA ADC
      • MCA UART serial port
      • MCA power key input
      • MCA PWM
      • MCA RTC
      • MCA watchdog
      • MCA management application
    • MMC/SD/SDIO
    • OTP bits
    • Power management
    • PWM
    • SPI
    • Touch screen
    • UART
    • USB
      • Using the USB Host port
      • Using the USB port (as device)
    • Video
      • HDMI
      • LVDS
    • Wi-Fi
      • Configuration
      • Get started with Wi-Fi
      • Configuration modes
        • Client infrastructure mode
        • Access point mode
        • Wi-Fi Direct
        • Concurrent modes
      • Network bridging
      • Regulatory domains
    • XBee sockets
  • Digi TrustFence for Yocto
  • Digi ConnectCore Smart IOmux
    • Download and install Smart IOmux
    • Get started
    • Work with designs
      • Create a new design
      • Create a cross-platform design
        • Work with cross-platform designs
      • Load a saved design
      • Save a design
      • Export a design
      • Export a device tree
    • Work with components
      • Add components
      • Remove components
      • Sort components
      • Edit components
      • Get device tree
    • Configure your design
      • Change IOmux pad
      • Lock an IOmux pad
      • Change the IOmux electrical value
      • Review your design in Table view
      • Resolve pad conflicts
    • Working modes
      • Configuration view
      • Device tree view
      • Table view
    • Update Digi ConnectCore Smart IOmux
      • View change log
    • Additional resources
      • Known issues and limitations
  • Hardware
    • Hardware reference manuals
    • Design files
    • Hardware variants
  • Additional resources
    • Embedded systems terminology
    • Glossary of cryptography terms
    • Reference materials
ConnectCore 8M Nano
Version
  • Get started
    • Step 1 - Requirements
    • Step 2 - Set up the hardware
    • Step 3 - Program the Yocto firmware
    • Step 4 - Create your first applications
    • Next steps
  • Digi Embedded Yocto
    • Release notes
      • Release changelog
      • Known issues and limitations
      • Support contact information
    • Application development
      • Digi ADE
        • Set up the development environment
        • Create a C/C++ project
        • Customize project build options
        • Build a project
        • Launch remote applications
      • Qt Creator
        • Install Qt
        • Configure Qt Creator
        • Create a Qt quick application
      • Command line
        • Install a pre-compiled toolchain
        • Create and build a "Hello world" application
        • Launch the application
      • Recovery library (firmware update)
      • Digi APIx for embedded
        • Set up your project for Digi APIX
        • ADC API
        • CAN API
        • GPIO API
        • I2C API
        • PWM API
        • Power management API
        • SPI API
        • Watchdog API
        • Define interface aliases
      • Cloud Connector
        • Set up your project for Cloud Connector
        • Start Cloud Connector
        • Receive data from Remote Manager
        • Send data to Remote Manager
        • Typed data - data points
        • Untyped data - binary data points
      • XBee libraries
    • Yocto system development
      • Set up workstation
      • Install Digi Embedded Yocto
      • Create and build projects
      • Boot the system
      • Partitioning
        • Yocto eMMC layout
        • Change partition table
      • Update firmware
        • Program firmware from Linux
        • Program firmware from U-Boot
        • Program MCA firmware
      • Customize the root filesystem
        • Configure network settings
        • Manage user accounts
      • Amazon Web Services (AWS) IoT
        • Get started with AWS IoT
        • Get started with Greengrass
        • Create an AWS IoT image
        • AWS IoT device SDK
      • Digi Remote Manager
        • Connect to Remote Manager
        • Monitor the system
        • Update the firmware with Remote Manager
        • Access the filesystem
        • Get device information
        • Automate operations
        • Advanced remote configuration
      • Network failover and recovery
      • System monitor
      • System watchdog
      • Custom carrier board
        • Add a new custom machine
        • Carrier board version and ID
      • Kernel development workflows
        • Build custom Yocto kernel recipe
        • Build standalone/external images
        • Make quick changes in the Yocto devshell
        • Deploy the kernel on your target
    • U-Boot bootloader
      • Environment variables
      • Digi U-Boot custom commands
        • Direct boot
        • Firmware update
        • MMC extended CSD register
      • Configuration options
        • Secure console options
      • U-Boot files by variant
    • Recover your device
    • Enable support for a Fusion display
  • Linux kernel BSP
    • Device tree files
    • Pin multiplexing (IOMUX)
    • ADC
      • Analog comparator
    • Audio
    • Backlight
    • Bluetooth
      • Bluetooth classic
      • Bluetooth Low Energy
    • Camera
    • CAN
    • Cellular
    • Cryptochip
    • Cryptographic accelerator
    • Ethernet
    • GPIO
    • I2C
    • Micro Controller Assist (MCA)
      • MCA core functionality
      • MCA configuration tool
      • MCA I/O pads
      • MCA GPIO
      • MCA ADC
      • MCA UART serial port
      • MCA power key input
      • MCA PWM
      • MCA RTC
      • MCA watchdog
      • MCA management application
    • MMC/SD/SDIO
    • OTP bits
    • Power management
    • PWM
    • SPI
    • Touch screen
    • UART
    • USB
      • Using the USB Host port
      • Using the USB port (as device)
    • Video
      • HDMI
      • LVDS
    • Wi-Fi
      • Configuration
      • Get started with Wi-Fi
      • Configuration modes
        • Client infrastructure mode
        • Access point mode
        • Wi-Fi Direct
        • Concurrent modes
      • Network bridging
      • Regulatory domains
    • XBee sockets
  • Digi TrustFence for Yocto
  • Digi ConnectCore Smart IOmux
    • Download and install Smart IOmux
    • Get started
    • Work with designs
      • Create a new design
      • Create a cross-platform design
        • Work with cross-platform designs
      • Load a saved design
      • Save a design
      • Export a design
      • Export a device tree
    • Work with components
      • Add components
      • Remove components
      • Sort components
      • Edit components
      • Get device tree
    • Configure your design
      • Change IOmux pad
      • Lock an IOmux pad
      • Change the IOmux electrical value
      • Review your design in Table view
      • Resolve pad conflicts
    • Working modes
      • Configuration view
      • Device tree view
      • Table view
    • Update Digi ConnectCore Smart IOmux
      • View change log
    • Additional resources
      • Known issues and limitations
  • Hardware
    • Hardware reference manuals
    • Design files
    • Hardware variants
  • Additional resources
    • Embedded systems terminology
    • Glossary of cryptography terms
    • Reference materials

Digi Embedded Yocto Board Support Package

  • Device tree files

  • Pin multiplexing (IOMUX)

  • Analog-to-Digital Converter (ADC)

  • Audio

  • Backlight

  • Bluetooth

  • Camera

  • Controller Area Network (CAN)

  • Cellular

  • Cryptochip

  • Cryptographic Accelerator and Assurance Module (CAAM)

  • Ethernet

  • General Purpose Input/Output (GPIO)

  • I2C

  • Micro Controller Assist (MCA)

  • MMC/SD/SDIO

  • One-time programmable (OTP) bits

  • Power management

  • Pulse-width Modulation (PWM)

  • Serial Peripheral Interface (SPI)

  • Touch screen

  • Universal Asynchronous Receiver/Transmitter (UART)

  • Universal Serial Bus (USB)

  • Video

  • Wi-Fi

  • XBee sockets

Digi Embedded Yocto Board Support Package:

This topic for another platform?

  • ConnectCore 6UL
  • ConnectCore 8X
  • ConnectCore 6
  • ConnectCore 6 Plus
Scroll to top of page
Product page More documentation Official site About Digi Contact us Support
©2025 Digi International Inc. All rights reserved.
Site last generated: Oct 17, 2025
Digi International Inc.