Release 2.6-r3
This document provides information about Digi Embedded Yocto, Digi International’s professional embedded Yocto development environment.
Digi Embedded Yocto 2.6 is based on the Yocto Project™ 2.6 (thud) release.
Supported Platforms
Software for the following hardware platforms is in production support:
ConnectCore 8M Nano
-
ConnectCore 8M Nano System-on-Module (SOM)
-
ConnectCore 8M Nano Development Kit
ConnectCore 8X
-
ConnectCore 8X System-on-Module (SOM)
-
ConnectCore 8X SBC Pro
ConnectCore 6UL
-
ConnectCore 6UL System-on-Module (SOM)
-
ConnectCore 6UL SBC Express
-
ConnectCore 6UL SBC Pro
ConnectCore 6 Plus
-
ConnectCore 6 Plus System-on-Module (SOM)
-
ConnectCore 6 Plus professional development kit
ConnectCore 6
-
ConnectCore 6 System-on-Module (SOM)
-
CC-WMX-K87C-FJA
-
CC-WMX-K77C-TE
-
CC-WMX-L97D-TN
-
CC-WMX-J98C-FJA
-
CC-WMX-J98C-FJA-1
-
ConnectCore 6 Jumpstart Development Kit (SBC with Connectore 6 module)
Previous versions of Digi Embedded Yocto include support for additional Digi hardware.
Installation
Digi Embedded Yocto is composed of a set of different Yocto layers that work in parallel. The layers are specified on a manifest file.
To install, please follow the instructions at Yocto system development.
Downloads
-
Demo images: https://ftp1.digi.com/support/digiembeddedyocto/2.6/r3/images/
-
Software Development Kit (SDK): https://ftp1.digi.com/support/digiembeddedyocto/2.6/r3/sdk/
