Apply a configuration to a device or a device group: Overview

You can apply a device configuration to one selected Connect Sensor device in a device group, or to all of the devices in a group that are the same model. The configuration is applied the next time that the Connect Sensor wakes up and connects to Digi Axess, either at the scheduled wake time or if it is done manually using a magnet.

• All devices of the same model type: Apply a device group configuration to the devices of the same model in a device group as needed. This ensures that the configuration for the device models of the same type are in sync.

• One device in a device group: You can apply a device group configuration to only one device in a device group or to one that is not in a device group. This is useful if you have one device in a group that should have a different configuration.

Note You can apply a configuration file from the Digi Axess Admin menu or from the map only to Connect Sensor devices. Configurations can be applied to a Z45 Controller from the device's web UI.

The table below contains all of the methods available for applying a configuration to a Connect Sensor.

Update one device

Digi Axess Admin Menu	Information
Pick a device, then pick the configuration.   Device Management > Devices	Select one device and apply a configuration
Pick a configuration, then pick a device.   Device Configuration Management > Device Configurations	Select a configuration and apply to one device

Digi Axess Map	Information
Device Summary page	Apply a configuration file to a Connect Sensor from the Device Summary page

Update all devices of the same model in a device group

Digi Axess Admin Menu	Update one device
Pick a group, then pick a device model and configuration combo from the Configurations tab.   Device Management > Device Groups	Select a device group and apply a configuration from the Configurations tab
Pick a group, then a device model, then a configuration.   Device Management > Device Groups	Select a device group from the Device Groups page and apply a configuration
Pick a group, then a device model, then a configuration, then click the blue Apply Config button.   Device Management > Device Groups	Select a device group and use the blue Apply Config button
Pick a configuration and model combo, then pick a device group.   Device Configuration Management > Device Configurations	Select a configuration and apply to a device group
Pick a device group, model, and configuration combo.   Device Configuration Management > Device Configurations	Reapply a device group configuration