Apply a configuration file to a Connect Sensor from the Device Summary page

You can apply a selected device configuration to a Connect Sensor from the device's Device Summary page. The update happens during the next time that the Connect Sensor wakes up and connects to Digi Axess, either at the scheduled wake time or if it is done manually.

The device configurations are created from a saved back up of a configuration file from a device. See Back up a Connect Sensor configuration.

Note You can also apply a configuration to a Connect Sensor device or device group from the Administration menu. See Device Configuration Management: Manage in Digi Axess Admin

Note You can apply a configuration file to only Connect Sensor devices.

Log into Digi Axess. The Digi Axess map displays.
From the mapped device list, find the Connect Sensor device for which you want to update the Connect Sensor firmware.
Click the device name in the mapped device list. The Device Summary page displays.
Click the Apply Config button. The Apply Device Configuration - Select Device Config page displays.
From the Device Configuration Type field, select the configuration type.
- Provided: The device configuration is saved locally.
- Shared: The device configuration is saved to Digi Axess.
Select device configuration.
- Provided Device Configuration: If you selected Provided, the Provided Device Configuration field displays. You can use this field to limit the configurations that are included in the list. As you type, the list is updated to include only the configurations that match the entry. You can also simply select a configuration from the list.
- Shared Device Configuration: If you selected Shared, the Shared Device Configuration field displays. You can use this field to limit the configurations that are included in the list. As you type, the list is updated to include only the configurations that match the entry. You can also simply select a configuration from the list.
Click on a configuration from the list. The selected device or device group displays in the Selected Device Config window.

Note Click on the selected device configuration option in the Selected Device Config list to deselect it.
Click Next. The Apply Device Configuration - Confirm page displays, showing the device to which the configuration will be applied, and information about the configuration.

Note A yellow warning banner displays at the top of the screen, to alert you that applying a device configuration that cannot be undone.
Decide whether you want to apply the configuration:
- Confirm: Click Confirm to continue and apply the configuration.
- Back: Click Back to return to the previous screen.
- Home: Click Home to return the main Digi Axess map page.