Reapply a device group configuration

You can apply a device group configuration to the devices in a device group as needed. This ensures that the configuration for the device models of the same type are in sync.

Note You can apply a configuration file from the Digi Axess Admin menu only to the Connect Sensor devices in the group. Configurations can be applied to a Z45 Controller from the device's web UI.

The list of configurations available includes the device configurations that have been backed up and saved, for the devices that are in a device group to which you have access, plus all of the default configurations that are provided with your Digi Axess account.

Note You can apply a configuration to a Connect Sensor device using this method or other methods. See Apply a configuration to a device or a device group: Overview.

1. Access the Digi Axess Admin page. You must have Admin or Device User privileges to access this page.

2. From the Device Configuration Management section in the Admin dashboard, click Device Group Configurations.

   As an alternative, you can click Device Configurations from the dashboard pane to the left of the page. The Device Group Configurations page displays.

3. Scroll through the list of device group configurations to find the one that you want to reapply.

4. In the row for the group you want to update, click Reapply Device Configuration. The Confirm Device Configuration Reapplication page displays, showing a list of the devices in the device group.

5. Click Continue to reapply the configuration. The Device Group Configurations page is updated to display a message at the top of the screen to verify that the device configuration was initiated. Click the here link to review the installation history for the device group configuration.

   • Click Back to return to the previous page. The configuration is not reapplied.