Select a device group and apply a configuration from the Configurations tab

You can apply a configuration to the devices of the same model type in a device group. This ensures that the configuration for the device models of the same type are in sync.

Note You can apply a configuration to a Connect Sensor device using this method or other methods. See Apply a configuration to a device or a device group: Overview.

Note You can apply a configuration file from the Digi Axess Admin menu only to the Connect Sensor devices in the group. Configurations can be applied to a Z45 Controller from the device's web UI.

1. Access the Digi Axess Admin page. You must have Admin or Device User privileges to access this page.

2. From the Device Management section in the Admin dashboard, click Device Groups. As an alternative, you can click Device Groups from the dashboard pane to the left of the page. The Device Groups page displays.

3. In the Group Name column, click on the name of the device group that you want to review. To find a group, scroll through the list of names, or limit the list using the search field. Type a search term in the search field and then click Search.

4. Click the Configurations tab.

5. Determine the model type to which you want to reapply the device configuration, and click Reapply Device Configuration in that row. The Confirm Device Configuration Reapplication page displays, showing a list of the devices in the device group.

   • Click Continue to reapply the configuration. The Device Group Configurations page is updated to display a message at the top of the screen to verify that the device configuration was initiated. Click the here link to review the installation history for the device group configuration.

   • Click Back to return to the previous page. The configuration is not reapplied.