Get started with Connect EZ 4/4i

This section explains what comes with each Connect EZ model, how to install the necessary software, and how to connect the hardware.

Before you begin: Register your Connect EZ 4/4i

Connect EZ 4i ONLY: Review installation instructions for hazardous locations

Step 1: Verify product components

Step 2: Connect the power supply

Step 3: Connect to site network using an Ethernet LAN

Step 4: Connect the device to the network using Wi-Fi

Step 5: Discover the IP address using the Digi Navigator

Step 6: Configure RealPort from the Digi Navigator

Step 7: Connect to the web UI and update the Connect EZ 4/4i firmware

Step 8: Connect to Digi Remote Manager

 

Optional

• Change the password on the Connect EZ

• Mount the Connect EZ 4/4i device

• Connect equipment to the Connect EZ serial port

• Create a cellular connection using the CORE module

Administrators only

• Additional configuration to the device can be done in Remote Manager or in the device's local web user interface.