Connect EZ 4i ONLY: Review installation instructions for hazardous locations

This information is intended for these Connect EZ 4i models:

• Ethernet Gateway: Model 50002072-03 and 50002072-06

Before you begin installing your Connect EZ 4i device, please review these installation instructions for hazardous locations.

• This equipment is suitable for use in Class I, Division 2, Groups A, B, C, D OR non-hazardous locations only.

• All external or field wiring must be in accordance to NFPA 70 Article 501.10(B).

• The unit is intended for fixed installations.

• This equipment is considered open type, only accessible by the use of a tool.

• Antenna connections provide non-incendive energy levels for use in Class I, Division 2, Groups A, B, C and D, Hazardous Locations. Install in accordance with Control Document No. 90002470-88 A.