Step 1: Verify product components

Verify that you have the following included equipment.

NEXT STEP: If you are performing the initial device set-up, proceed to the next step after verifying the components: Step 2: Connect the power supply.

Included equipment for Connect EZ 4/4i/PoE

Equipment Description

Connect EZ 4

Connect EZ 4i

Connect EZ PoE

For detailed information about the panels, see:

Note Connect EZ 4i only: An industrial power connector is attached to the power jack. Part number 18000724.

Power supply

Connect EZ 4

The Connect EZ 4 is intended to be powered by a locking barrel output transformer rated 100-240 VAC to 12 VDC, and with a 3 A output.

Use the included power supply: Digi PN 24000136

For information about connecting the power supply, see Step 2: Connect the power supply.

 

Connect EZ 4i

The Connect EZ 4i is intended to be powered by a certified extended temperature power supply pigtail DC cable with output rated at 100-240 VAC to 12 VDC 3 A, -40 C to +74 C.

Use the included power supply: Digi PN 24000141

For information about connecting the power supply, see Step 2: Connect the power supply.

 

Connect EZ with PoE

The Connect EZ 4 with PoE does not include a power supply.

  • If a power supply is needed for testing you can order the following: Connect EZ 2/4 Power Supply Accessory Kit: Digi PN 76002119

  • You can also use the ETH2/POE Ethernet port on the device as a remote power point by connecting a 802.3af PoE PSE (power source) to the port. See Front panel and LEDs.

Ethernet cable

CAT 6 Ethernet cable.

Connect to a site network using an Ethernet cable. See Step 3: Connect to site network using an Ethernet LAN.

Wi-Fi antenna

One Wi-Fi antenna is included.

  • 2.4 & 5 GHz

  • 5dBi dipole

  • Digi PN 29000938

See Connect the Wi-Fi antenna.
DIN rail clip

The DIN rail clip connects to the back of the device and is used to mount the device onto a DIN rail. Screws are included.

See Attach to DIN rail with clip.

The kit includes a DIN rail clip and two screws that meet these requirements:

  • M4 in diameter

  • 5 mm in length

  • Countersunk

  • Phillips #2

  • Black Steel

Global plug kit

If you purchased the GLB version of the device, a kit that includes global outlet plugs is included.

  • Connect EZ 4: Use the included kit: Digi PN 18000291

  • Connect EZ 4i: Use the included kit: Digi PN 18000726
Loose label

A loose label sticker that includes information about the device is included in the box. You should retain this label sticker with your hardware records. For more information about the label, see Device label sticker sample.

Note This label includes the unique default password for the device. This unique password will be needed if the device is factory reset and you want to access the web UI on the device.

Connect EZ 4 with PoE: Optional additional equipment

Equipment Description
PoE PSE (power source)

For the Connect EZ 4 with PoE variant, you can connect an 802.3af PoE PSE (power source) to the ETH2/POE port and use it as a remote power point.

See Front panel and LEDs.

Optional additional cellular equipment

These items are required only if you are using a CORE module to connect to a cellular network.

Equipment Description
CORE module

Note A SIM card is also required.
SIM card

An activated SIM card provided by your cellular network operator. You can insert up to two SIM cards in the CORE module. See Create a cellular connection using the CORE module.

The CORE module supports the standard mini-SIM cards (2FF).
LTE Antenna (2)

Two LTE antennas are included.