Step 1: Verify product components
Verify that you have the following included equipment.
NEXT STEP: If you are performing the initial device set-up, proceed to the next step after verifying the components: Step 2: Connect the power supply.
Included equipment
| Equipment | Description |
|---|---|
|
Connect EZ Mini |
For detailed information about the panels, see: |
| Power supply |
Each kit includes a power supply. The power supply is a Direct Plugin Class 2 output transformer rated 18 W, 12 VDC, and with a 1.5 A output. For information about connecting the power supply, see Step 2: Connect the power supply. |
| Ethernet cable |
Connect to a site network using an Ethernet cable. See Step 3: Connect to site network using an Ethernet LAN. |
| DIN rail clip kit |
The DIN rail clip connects to the back of the device and is used to mount the device onto a DIN rail. See Attach to DIN rail with clip. The kit includes a DIN rail clip and two screws that meet these requirements:
|
| Loose label |
A loose label sticker that includes information about the device is included in the box. You should retain this label sticker with your hardware records. For more information about the label, see Device label sticker sample. Note This label includes the unique default password for the device. This unique password will be needed if the device is factory reset and you want to access the web UI on the device. |
| Global plug kit | If you purchased the GLB version of the device, a kit that includes global outlet plugs is included. |
PDF
