Back panel

Item	Name	Description
1	Mounting tabs	The mounting tabs on the device are used to mount the device onto a mounting surface. Use round-head M4 size screws. The type and length are dependent on the mounting surface type. Screws are not provided. If you choose not to mount the device, you can permanently remove the mounting tabs with a pliers.
2	Reset button	Use to reset the device to factory defaults.
3	DIN rail clip	You can attach a DIN rail clip to the back of the device and then mount the device to a DIN rail.

1

Mounting tabs

The mounting tabs on the device are used to mount the device onto a mounting surface.

Use round-head M4 size screws. The type and length are dependent on the mounting surface type. Screws are not provided.

If you choose not to mount the device, you can permanently remove the mounting tabs with a pliers.

2

Reset button

Use to reset the device to factory defaults.

3

DIN rail clip

You can attach a DIN rail clip to the back of the device and then mount the device to a DIN rail.