Configure pins and protocols

Before you begin configuring the analog and digital pins as well as the Modbus protocols, make sure you have completed the following steps:

• Configure the cellular connection
• Check the cellular connection
• Wire the I/O sensors
• Add a device to Digi Remote Manager

After completing those steps, you can use Remote Manager with Connect Tank to remotely configure sensors, schedule sensor readings and reports, review reports (sensor and device data), and manage the device. Connect Tank automatically detects the device version and provides support for its configuration within the available options in Remote Manager.

You can also configure Connect Tank to send alarm reports when an alarm condition occurs in an environment. Alarm reports are separate from scheduled reports. Use alarm reports to communicate changes in your environment and the device, including:

• Low and high sensor input values
• Rapid changes in sensor input values
• Battery life

See Configure pins and protocols, Configure battery life percentage alarms, and View device information.