Step 5: Check the cellular connection

Make sure the cellular network provides an adequate signal where you install Connect Tank to maintain a consistent cellular connection.

Note Proper network coverage helps reduce power consumption, leading to improved battery life.

To check the cellular network connection at the install location:

1. Wake Connect Tank:
   • If the enclosure is open, press the Wake button.
   • If the enclosure is closed, swipe the magnet across the magnet icon on the outside of the device.
     
2. The LED indicators light up in a predetermined sequence when you manually wake the device.
3. If Connect Tank does not connect to the cellular network, see Device not connected to the cellular network.

 

NEXT STEP: After reviewing components, proceed to Step 6: Wire the I/O sensors.