Step 6: Wire the I/O sensors

You can wire the analog and digital input/output sensors or power using the I/O interface. For detailed information, see the Digi Connect Sensor I/O Wiring Guide.

Note Using gaskets, seals, glands or plugs other than those supplied by Digi may void certifications and regulatory approvals.

Note All external or field wiring must be in accordance with NFPA 70 Article 501.10(B).

After wiring sensors, use the following sections in this guide to configure additional settings and remotely manage Connect Tank.

 

NEXT STEP: After reviewing components, proceed to Step 7: Add a device to Digi Remote Manager.