Apply a device group MQTT configuration

You can apply an MQTT configuration that was created for the device group in which this device is included.

For information about creating an MQTT device group configuration, see Data Export: Manage MQTT configuration.

Note You can also manually configure MQTT for the device. See Configure MQTT for a device from the device's web UI.

1. Access the device's web UI from the Device Summary page.

2. In the Services section, click MQTT. The MQTT Configuration page displays.

   Note The MQTT option is available only if firmware version 4.2.1.26 or above is installed on the device. You can review the current firmware version installed on the device and update the firmware if needed.

3. From the Active MQTT Configuration list box, select a device group MQTT configuration option. The MQTT Configuration page is updated to show the device group MQTT configuration.

4. Click Update to save the selection.