Data Export: Manage MQTT configuration

The MQTT (Message Queuing Telemetry Transport) messaging protocol can be configured for a Connect Sensor device. You can manually configure MQTT for a Connect Sensor device, or create an MQTT configuration for a device group that can be applied to any Connect Sensor device in the group.

The MQTT device group configurations are created in the Administration dashboard in Digi Axess. MQTT is configured for a Connect Sensor device from the device's web UI.

Create an MQTT configuration

You can create an MQTT configuration for a device group in the Administration dashboard in Digi Axess.

• Configure MQTT from the Administration dashboard

After you have added an MQTT configuration, you can maintain it:

• Review the MQTT configurations

• Edit an MQTT configuration

• Delete an MQTT configuration

Apply an MQTT device group configuration to a Connect Sensor

You can apply an MQTTconfiguration to a Connect Sensor in the device's web UI.

• Apply an MQTT device group configuration to a device