Access the device's web UI from the Device Summary page

You can access a device's web UI from Device Summary page in the Digi Axess map.

1. Log in to Digi Axess. The Digi Axess map displays.

2. Find the device that you want to configure, using one of the following methods, and display the Device Summary page.

   • Click on the device's location pin on the map.

   • If your device is mapped, scroll through the mapped device list displayed on the lower left of the Digi Axess map. Click on the device name.

   • Use the search feature in the toolbar. As you type, a list of matching devices displays. Click on the tile for the device you want to configure.

   • Click the Grid or Table icons on the left side of the map to display a list of devices. Use the search features to limit the devices displayed. Click on the tile or the row for the device you want to configure.

3. In the Device Summary page, click the device name or the Configure Device button.

   The web UI for the device displays in Digi Axess.

   Any changes you make are stored and then pushed from Digi Axess the next time that the Connect Sensor wakes and connects to the network. See Configure the Connect Sensor from the Automation Dashboard menu.