Update the Connect Sensor firmware from the web UI

You can schedule an update to the Connect Sensor firmware. The update happens during the next time that the Connect Sensor wakes up and connects to Digi Axess, either at the scheduled wake time or if it is done manually.

In the Device Reported Firmware section, you can review information about the firmware that is currently installed on the device.

A banner displays at the top of the screen to alert you whether a Connect Sensor firmware update is currently running. If the device is already scheduled for a firmware update, you are not allowed to schedule another update.

Note You can also update the device's firmware from the Device Summary page.

1. Access the web UI for Connect Sensor from the Device Summary page. The Automation Dashboard displays.

2. Choose System Tools > Firmware Update. The Update Firmware screen displays.

3. From the Select a Firmware Type list box, select the standard option.

   Note Other options may be available, but do not choose an option other than standard unless directed.

4. From the Select a Firmware Version list box, select the firmware version that you want to update to.

5. Click Schedule Update to store the update instruction. The firmware update occurs the next time that the Connect Sensor wakes and connects to Digi Axess. A confirmation dialog displays.

6. Click OK. The "Firmware Update Scheduled" banner displays at the top of the page.

7. In the banner, you can click Refresh to update the update status.