Configure the data collection and push schedule

By default, the Connect Sensor is configured to wake up and connect to Digi Axess every 12 hours. When the device is awake and connected to Digi Axess, it pushes sensor data to Digi Axess, and then asks Digi Axess for configuration changes. If there are any, Digi Axess pushes the changes and the device applies them, restarts, and then reconnects to Digi Axess. When this process is complete, the Connect Sensor goes to sleep and waits to wake and reconnect at the next scheduled time.

You can choose to configure a wake-and-connect schedule for a device if you don't want to use the default schedule. A schedule determines the first wake-up time, the time interval between reading the sensor connected to the Connect Sensor, and how many reads should occur before data is pushed from the device to Digi Axess.

Schedule graph

You can review the graph that displays. The graph is a preview of a full day of what the expected sample and push schedule would be for the device. The total number of reads (Total Reads) and pushes (Total Pushes) made during the 24-hour time period are noted in the graph.