Cellular modem firmware update: Connect Sensor

You can schedule an update to the cellular modem firmware on the Connect Sensor. The update happens during the next time that the Connect Sensor wakes up and connects to Digi Axess, either at the scheduled wake time or if it is done manually.

In the Device Reported Cellular Firmware section, you can review information about the cellular firmware that is currently installed on the device.

A banner displays at the top of the screen to alert you whether a cellular modem firmware update is currently running. If the device is already scheduled for a cellular firmware update or if newer firmware is not available, you are not allowed to schedule an update.

1. Access the web UI for Connect Sensor from the Device Summary page. The Automation Dashboard displays.

2. Choose System Tools > Cellular Firmware Update. The Update Cellular Firmware page displays. Information about the current cell modem firmware displays in the Device Reported Cellular Firmware section.

3. From the Select a Cellular Firmware Version list box, select the firmware version that you want to update to.

4. Click Schedule Update to store the update instruction. The firmware update occurs the next time that the Connect Sensor wakes and connects to Digi Axess.