Enable system logging for a Connect Sensor XRT-M

You must enable system logging if you want to use the feature.

Note You can also enable system logging from the Connect Sensor XRT-M web UI. See Configure system logging for a Connect Sensor XRT-M.

1. Access the Digi Axess Admin page. You must have Admin or Device User privileges to access this page.

2. From the Device Management section in the Admin dashboard, click Devices or Change next to Devices. As an alternative, click Devices from the dashboard pane on the left of the screen.

   The Device Groups page displays.

3. Search for the device that you want to update. You can scroll through the list or use the search fields to limit the list.

   Note Make sure that the type in the Model column is Connect Sensor XRT-M.

4. From the Serial Number column, click the serial number for the device you want to update.

5. Click the green arrows to navigate to the Logging page.

6. Click the Enable Device Logging slider button.

7. From the Disable Logging In list box, select the number of days logs should be collected. When the time limit is reached, the logging feature is automatically disabled and logs are no longer collected from the device.

8. Any logs display in the Device Logs window. When new logs are sent from the device to Digi Axess, any logs over seven days old are automatically cleared. You can also manually clear any logs when needed.

9. Click Save. You are returned to the Devices page.