Clear a system log on a Connect Sensor XRT-M

You can manually clear all of the system logs.

1. Access the Digi Axess Admin page. You must have Admin or Device User privileges to access this page.

2. From the Device Management section in the Admin dashboard, click Devices or Change next to Devices. As an alternative, click Devices from the dashboard pane on the left of the screen.

   The Device Groups page displays.

3. Search for the device that you want to update. You can scroll through the list or use the search fields to limit the list.

   Note Make sure that the type in the Model column is Connect Sensor XRT-M.

4. From the Serial Number column, click the serial number for the device you want to update.

5. Click the green arrows to navigate to the Logging page.

6. Click Clear Device Logs.