Configure system logging for a Connect Sensor XRT-M

You can enable and configu

Note You can also enable system logging from the Connect Sensor XRT-M Devices page in the Administration menu. See Enable system logging for a Connect Sensor XRT-M.

1. Log into the Connect Sensor XRT-M web UI on Digi Axess.

2. In the Options section, click System Tools. The Tools and Utilities page displays.

3. Click Logging. The System Logging Configuration page displays.

4. Click Enable Device Logging. When enabled, the slider is green.

5. From the Disable Logging In list box, select the time period for which you want to collect and store system logs. When the time limit is reached, the logging feature is automatically disabled and logs are no longer collected from the device.

6. Any logs display in the Device Logs window. When new logs are sent from the device to Digi Axess, any logs over seven days old are automatically cleared. You can also manually clear any logs when needed.

7. Click Update.

8. Click OK to confirm the update.