Review status information for a Connect Sensor

The system status, network status, and configuration information for a Connect Sensor can be displayed in the Device Summary page.

Automation Control Groups

Any automation control groups that have been assigned a group name display as a section on this page. The groups are unique to each Connect Sensor.

As an alternative, you can also review automation control group data in the Automation Dashboard page.

System Status

The system status information is calculated for the current data as of the last time that the device reported information.

Item Description

Battery Status

A battery graphic describes the status of the battery.

  • Full green: Battery status good.

  • Partial green: Battery status good.

  • Yellow: Battery should be changed soon.

  • Red: Battery needs to be changed.

  • Dash: Battery is not plugged in.
Case Temperature The temperature of the Connect Sensor+ enclosure.
CPU Temperature The temperature of the Connect Sensor+ device.
Firmware Version The current firmware version installed on the device.

Network Status

Item Description
APN

The APN assigned to the device.

  • (Auto): The APN is not yet known. This may occur if the Connect Sensor+ has not yet connected to Digi Axess.

  • <APN number>: The actual APN string that was used during the most recent connection between Connect Sensor+ and Digi Axess, or the APN that was manually assigned in the web UI.

Cell Modem Model Name of the cell modem model in the device.
Cell Modem Firmware The current version of the cell modem firmware.
Provider The name of the cellular carrier.
ICCID The SIM card identifier.
IMSI The unique International Mobile Subscriber Indentity assigned to the SIM card.
RSSI (Avg/Low/High) The average, low, and high signal strength for the selected date.
EC/IO (Avg./Low/High) The average, low, and high measure of the quality of the signal from the tower to the cell modem.
Cell ID The unique number by a cell tower can be identified within a location area code (LAC) or a GSM network.
Last Disconnect Reason The reason for the last time the device disconnected from a cell tower.

Config Status

Item Description
Sync Status Information about the next synchronization between Digi Axess and the device.
Last Sync The date and time of the last full configuration synchronization between Digi Axess and the device.