Notification types

The tables below explain the types of notifications that may be sent.

Stale Device Notifications alert

A stale device notification is sent when the device is no longer connecting to Digi Axess. The time threshold can be configured at the device and device group level, and defaults to 24 hours.

Notification statement Available for:

Device not connecting to Digi Axess.

  • Connect Sensor+

  • Connect Sensor XRT-M NEMA

  • Z45 Controller

Battery alerts

A battery alert is sent when any of the battery conditions shown below are met.

Note All of the battery alerts are available for the Connect Sensor XRT-M NEMA and Connect Sensor XRT-M devices. The Battery Replacement Required alert is the only one available for Connect Sensor+ devices.

Notification statement Available for:
Battery Replacement Required
  • Connect Sensor+

  • Connect Sensor XRT-M NEMA

Battery Replacement Recommended

  • Connect Sensor XRT-M NEMA

Battery Has Been Removed

  • Connect Sensor XRT-M NEMA

Battery Has Been Replaced

  • Connect Sensor XRT-M NEMA

External Power State Change Detected

(yellow banner)

 

This notification is sent in a yellow warning banner when Digi Axess has detected that the external power has been disconnected and the device is running on battery power only.
  • Connect Sensor XRT-M NEMA

External Power State Change Detected

(green banner)

 

This notification is sent in a green banner when Digi Axess has detected that the external power has been connected and the batteries are in backup mode.
  • Connect Sensor XRT-M NEMA

Device Configuration alerts

A device configuration alert is sent when any of the conditions shown below are met.

Notification statement Available for:
Device Configuration Installation
  • Connect Sensor+

  • Connect Sensor XRT-M NEMA

Device Configuration Install Initiated
  • Connect Sensor+

  • Connect Sensor XRT-M NEMA

Device Configuration Completed
  • Connect Sensor+

  • Connect Sensor XRT-M NEMA

Device Configuration Completed with Errors
  • Connect Sensor+

  • Connect Sensor XRT-M NEMA

Firmware Update alerts

A firmware update alert is sent when any of the conditions shown below are met.

Notification statement Available for:
Firmware Update Initiated
  • Connect Sensor+

  • Connect Sensor XRT-M NEMA

Firmware Update Completed
  • Connect Sensor+

  • Connect Sensor XRT-M NEMA

Firmware Update Completed with Errors
  • Connect Sensor+

  • Connect Sensor XRT-M NEMA

Firmware Update Cancelled
  • Connect Sensor+

  • Connect Sensor XRT-M NEMA

GPS Location Update alerts

A GPS location update alert is sent when any of the conditions shown below are met.

Notification statment Available for:
GPS Location Update

  • Connect Sensor XRT-M NEMA

GPS Location Update Requested

  • Connect Sensor XRT-M NEMA

GPS Location Update Success

  • Connect Sensor XRT-M NEMA

GPS Location Update Failed

  • Connect Sensor XRT-M NEMA

GPS Location Update Cancelled

  • Connect Sensor XRT-M NEMA