Restore a Connect Sensor configuration

You can restore the configuration for a Connect Sensor from a backup saved on your computer or choose to restore these settings to the default configuration: all the analog, digital, and serial settings, the device profile, and all of the automation control settings.

The configuration is restored during the next time that the Connect Sensor wakes up and connects to Digi Axess, either at the scheduled wake time or if it is done manually.

1. Log into the Connect Sensor web UI from Digi Axess.

2. In the Options section, click System Tools. The Tools and Utilities page displays.

3. Click Backup/Restore. The Load Configuration page displays.

4. From the Select an Option section, click Install.

5. Determine the configuration type you want to install: from a configuration back up file or to restore the configuration to default settings.

   • Previously saved back up file

     1. In the Select a Location section, click Local Storage.

     2. Click Choose File and navigate to a saved back up file.

     3. Click Open.

     4. Click Submit to store the install instruction. The configuration install occurs the next time that the Connect Sensor wakes and connects to Digi Axess.

   • Restore to default settings

     1. In the Select a Location section, click Provided.

     2. From the Select a Configuration list box, select Blank Configuration.

     3. Click Submit to store the install instruction. The configuration install occurs the next time that the Connect Sensor wakes and connects to Digi Axess.