Back up a Connect Sensor configuration

You can back up a Connect Sensor's configuration that is saved in Digi Axess to the default download location on your computer.

  1. Log into the Connect Sensor web UI from Digi Axess.

  2. In the Options section, click System Tools. The Tools and Utilities page displays.

  3. Click Backup/Restore. The Load Configuration page displays.

  4. From the Select an Option section, click Save/Backup.

  5. In the Select a Location section, select where the configuration should be saved.

    • Local Storage: Select this option to save the backup to your computer. This is the default.

    • Shared Digi Axess: Select this option to save the backup to Digi Axess. The Axess Group list box displays. Select the group with which you want to share this configuration.

  6. In the Select a Module section, the Automation Control option is selected by default.

  7. In the File Name field, enter the file name for the saved configuration. The file is given a unique name by default but you can change it.

  8. Click Submit. The back up file is downloaded onto your computer and saved to the default download location. You can move the file to a new location if needed.