Digi Navigator

Digi Navigator is a Windows-based application that allows for the discovery, configuration, and management of supported Digi devices on a local network. In addition, Digi Navigator supports manual device addition using IP addresses when automatic discovery is unavailable.

You can use the Digi Navigator features to set an IP address for a device, access a device's web UI, and configure a serial port for RealPort mode.

Feature	Description
List of devices in Digi Navigator	When you launch Digi Navigator, a list of devices displays. This list includes the devices discovered by Digi Navigator plus any devices that you have manually added to the Digi Navigator's list of known devices. Digi Navigator device discovery process Services used to discover a device when connected to a network Manually add a device to the Digi Navigator known device list
Set an IP address	Reconfigure the IP address of a device to a DHCP address or a specified static address. Set an IP address for a device
Access the device's web UI	Access the device's web UI through an interface or a terminal emulator. Use Digi Navigator to access your device's web UI
Configure a serial port for RealPort mode	Configure a serial port for RealPort mode to enable communication between a device and your computer. RealPort exposes a serial port on a remote device as a standard COM/TTY port on a client computer. Configure RealPort mode using the Digi Navigator Note You can also configure your device and computer to use RealPort serial port mode without using the Digi Navigator. See Advanced RealPort configuration without using the Digi Navigator.