Get started with Connect EZ

This section explains what comes with each Connect EZ model, how to install the necessary software, and how to connect the hardware.

Before you begin: Register your Connect EZ

Step 1: Verify product components

Step 2: Connect the power supply

Step 3: Connect to site network using an Ethernet LAN

Step 4: Discover the IP address using the Digi Navigator

Step 5: Configure RealPort from the Digi Navigator

Step 6: Connect to the web UI and update the Connect EZ firmware

Step 7: Connect to Digi Remote Manager

 

Optional

• Change the password on the Connect EZ

• Mount the Connect EZ

• Connect equipment to the Connect EZ serial port

Administrators only

• Additional configuration to the device can be done in Remote Manager or in the device's local web user interface.