Step 1: Verify product components

Connect Tank includes the following components.

NEXT STEP: After reviewing components, proceed to Step 2: Activate the SIM card

Component	Description
Connect Tank
Battery Connect Tank uses a lithium metal battery. See Battery care and maintenance. For battery safety information, see Battery safety. Note The battery is included for all versions except for the -N versions.
SIM card The SIM card can be activated or replaced by an activated SIM card from your cellular service provider.

Component

Description

Connect Tank

Battery

Connect Tank uses a lithium metal battery.

See Battery care and maintenance.

For battery safety information, see Battery safety.

Note The battery is included for all versions except for the -N versions.

SIM card

The SIM card can be activated or replaced by an activated SIM card from your cellular service provider.

Optional accessories

The following accessories are available through Digi International Inc. For more information, visit the Digi Connect Sensor+ product page.

Component	Description
Cellular antenna Note This antenna is PN 76000926 and is an indoor-only antenna. Only outdoor-rated antennas should be used outdoors. For more information about antenna options, see the Digi Connect Sensor+ product page.
Magnet Used for manually waking the device.
Magnet mount accessory pack The pack includes four screws, and four magnets separated by plastic discs. See Install the magnet mount for installation instructions. CAUTION! The magnets are extremely powerful. Keep magnets separated. If they touch each other they are difficult to separate. Use caution when handling the magnets to avoid injury due to pinching.

Component

Description

Cellular antenna

Note This antenna is PN 76000926 and is an indoor-only antenna. Only outdoor-rated antennas should be used outdoors. For more information about antenna options, see the Digi Connect Sensor+ product page.

Magnet

Used for manually waking the device.

Magnet mount accessory pack

The pack includes four screws, and four magnets separated by plastic discs. See Install the magnet mount for installation instructions.

CAUTION! The magnets are extremely powerful. Keep magnets separated. If they touch each other they are difficult to separate. Use caution when handling the magnets to avoid injury due to pinching.