Install the magnet mount

You can install a magnet mount on Connect Tank so that you can securely place the device on a metal object.

Make sure you have the following equipment available:

• Magnet mount accessory pack. See Step 1: Verify product components for purchasing information.
• Appropriate screw driver.

Note You can skip this step if you did not purchase the magnet mount accessory pack.

1. Turn Connect Tank to access the bottom of the device.
2. Remove one magnet from the set of four magnets in the accessory pack.

CAUTION! The magnets are extremely powerful. Keep magnets separated. If they touch each other they are difficult to separate. Use caution when handling the magnets to avoid injury due to pinching.

3. Place the magnet on one corner of the device. Be sure to match the hole in the magnet to the hole in the corner.
4. Remove one of the screws from the accessory pack.
5. Using the screwdriver, screw the magnet onto the device.
6. Repeat this process to screw the remaining magnets onto the corners of Connect Tank. When you have completed this process, a magnet should be screwed onto each corner of the device.