Configure the Automation Dashboard display

You can configure how the dashboard groups are displayed in the Automation Dashboard and the Device Summary page. You can also configure how often the data should be refreshed.

1. Access the web UI for Connect Sensor from the Device Summary page. The Automation Dashboard displays.

2. Use one of the following methods to access the dashboard settings options.

   • Click the gear icon next to the Clear Sensor Data button. The configuration settings display.

   • Choose Dashboard > Dashboard Settings. The Dashboard Settings page displays. The configuration settings are in the Dashboard Options section.

3. Configure the dashboard display:

   • Display Template: Select the default display format of the pin values in the Details tab. Options are:

     • Default: The information for each pin displays in a tile.

     • Tabular. The Tabular information displays in a table format.

   • Default View: Select which dashboard tab displays as the default: Details, Overview, or Analysis.

   • Auto-Refresh Time: Specify the time interval at which you want the data to be automatically refreshed. The time is measure in seconds. The lowest time interval value you can enter is 30. The default is 0, which means that the data is not refreshed automatically. You can manually refresh the data at any time by clicking the Refresh button at the bottom of the page.

4. Click Update to save your changes.