Add dashboard groups and configure the display options

You can add a dashboard group as needed. A dashboard group can be used to organize similar pin data, so pick a name for the group that clearly describes the type of data that you want to group together.

After you have created dashboard groups, you can choose to hide groups that shouldn't be displayed, and determine if all groups or only a default group should display.

The dashboard groups display on the Automation Dashboard, Device Summary page and in the device comparison graphs.

Access the web UI for Connect Sensor from the Device Summary page. The Automation Dashboard displays.
Choose Dashboard > Dashboard Settings. The Dashboard Settings page displays.
Add a dashboard group.
1. Click Add Group. A numbered field displays.
2. Enter a descriptive name for the dashboard group in the field.
3. To add another group, click Add Group and repeat the process.
Configure the dashboard group display options.
- Hide: Click Hide for each dashboard group that you don't want to display on the dashboard.
- Default: Click Default to specify a default dashboard group. This will be the only group displayed on the dashboard. This option can be selected for only one dashboard group, and if this option is selected for one group, it is deselected for any other group. When Default is selected for a group, Show All Panels on Dashboard is deselected.
- Show All Panels on Dashboard: Click Show All Panels on Dashboard to include all of the dashboard groups by default. When Show All Panels on Dashboard is selected, Default is deselected.
Click Update.