Configure the Digi Axess and NTP servers for the device

You can configure the Digi Axess and NTP servers for the device in the Digi Axess Service Configuration page.

WARNING! Any changes made to the Digi Axess Server URL configuration may cause the device to no longer connect with Digi Axess. Digi recommends making changes to this section only when you have physical access to the device. If you change the configuration, you can reset it to the factory defaults if needed.

To configure servers:

1. Access the web UI for Connect Sensor from the Device Summary page. The Automation Dashboard displays.

2. Choose Services > Digi Axess Services > Server Configuration. The Server Configuration page displays.

3. Click Edit.

4. Configure the server URLs.

   • Digi Axess Server: Enter the URL of the Digi Axess server that this device should connect to.

   • NTP Server: Enter the URL of the NTP server to which the Connect Sensor connects to synchronize time.

5. Click Update to save your changes. A confirmation dialog displays.

6. Click OK to complete the change.