Clear Connect Sensor sensor data from the Automation Dashboard

You can remove all historical sensor data stored on the Connect Sensor device from the Automation Dashboard. This feature is useful if you have changed the sensor connected to a pin on the Connect Sensor, and you want to see only data for the sensors that are currently connected to the device.

WARNING! Once deleted, the sensor data cannot be recovered.

Note As an alternative, you can also delete Connect Sensor sensor data from the Device Management section from the Digi Axess Admin menu.

1. Access the web UI for Connect Sensor from the Device Summary page. The Automation Dashboard displays.

2. Choose one of the following methods:

   • Click the Clear Sensor Data button at the top of the page.

   • From the feature menu, choose System Tools > Clear Sensor Data.

3. The Clear Sensor Data page displays, with a banner message warning that once deleted, the sensor data cannot be recovered.

4. Click Clear Sensor Data to delete the historical sensor data.