Enable, disable, or delete a module

The virtual I/O or Modbus RTU module are enabled by default. You can disable a module if necessary and then enable it again when needed. More than one of each type can be enabled.

You can also delete any module except for the virtual I/O module labeled as number 1. This is default module and cannot be deleted.

1. Access the web UI for Connect Sensor from the Device Summary page. The Automation Dashboard displays.

2. Choose Automation > I/O Module. The I/O Module Configuration page displays.

3. In the Configured Devices section, find the module that you want to modify abd and select an option.

   • Enable: From the module's list box, select Enable to enable the module. The modules are enabled by default when one is created.

   • Disable: From the module's list box, select Disable to disable the module.

   • Delete: From the module's list box, select Delete to delete the module. You cannot delete the default virtual I/O module labeled as number 1.

4. Click Save.