Step 5: Power the RMS Z45

The RMS Z45 is immediately powered up when it is plugged into a main power supply.

1. Plug the power supply into a main power supply. The RMS Z45 automatically powers on and boots up. The LED lights on the RMS Z45 run through a start-up process. Generally this process takes one minute to complete.

   • LAN: The LAN LED flickers to show communication with your computer.

   • Service: The Service LED is solid once a cellular connection has been made to a cell tower. If you are using an Ethernet connection to an internal network instead of a cellular connection, a solid LED means the RMS Z45 is connected to the network.

     Note If you are using a cellular connection and the LED is not solid after a minute, your radio provisioning may need to be updated from the default.

   • Link: The Link LED is solid once the RMS Z45 has an IP address from the network.

 

NEXT STEP: Proceed to Step 6: Close and lock the RMS Z45 enclosure.