Step 6: Close and lock the RMS Z45 enclosure

After you have connected all of the RMS Z45 hardware, you should close and lock the enclosure. You must lock the enclosure using the enclosure key included in the accessory bag.

Note You cannot lock or unlock the enclosure without the enclosure key from the accessory bag.

  1. Close the enclosure cover.

  2. Make sure that the screw in the top of the lock fits into the base of the lock.

  3. Insert the enclosure key into the lock and cover the screw.

  4. Twist the key to lock the enclosure.

  5. Put the enclosure key in a safe place. You cannot unlock the enclosure without the enclosure key.

 

ASSEMBLY IS COMPLETE