Step 6: Wire the input sensors
You can wire the analog and digital input sensors or power using the input interface. For wiring instructions, see Wire the sensors to the Connect Sensor XRT-M NEMA I/O interface.
CAUTION! You must disconnect both batteries and any external power from the Connect Sensor XRT-M NEMA before wiring sensors to the I/O interface.
Note All external or field wiring must be in accordance with NFPA 70 Article 501.10(B).
HARDWARE ASSEMBLY IS COMPLETE
NEXT STEP: CONFIGURATION: You can log into the device's web UI from Digi Axess and configure the device. Proceed to Step 7: Configure the Connect Sensor XRT-M NEMA.