Back panel

A location for an optional second power supply for devices that are dual-powered.

Your device may have a second power supply installed from the factory, but if not you can purchase a second power supply unit and install it.

See Install an additional power supply unit.

The second power supply allows for additional power for the device.

See Power the Connect EZ 16/32.

Attach cellular antennas if the CORE module is used to complete a cellular connection. The antenna mounts are covered with a black button that can be removed.

See Create a cellular connection using the CORE module.

Insert a Digi Core Modem to complete a cellular connection.

Use these thumb screws to remove the CORE module plate so that you can insert the CORE module.

See Create a cellular connection using the CORE module.

Press the RESET button to reset the device to the factory default settings.

• Trigger the Config Reset mode using the RESET button

• Trigger a Factory Reset using the RESET button.

For detailed information about all of the methods you can use to reset your device, see Device reset.

Provides air flow for the device.