Install an additional power supply unit

If you have a single-powered device, you can purchase and install a second power supply unit.

The following part can be purchased: EZ-PSIK: Connect EZ 16/32cpower supply kit, port-side intake.

You will need a screwdriver to complete the installation.

To install a power supply:

1. Orient the device so the back of the device is facing you.
2. Using a screwdriver, remove the plate on the left side of the device.

   

3. Orient the power supply unit so that the exhaust is on the left and the power point is on the right.
4. Insert the unit into the slot on the left side of the device.
5. Turn the red thumb screws to securely attach the unit to the device case.