Review the Automation Control Log

The Automation Control Log records the value or state of inputs and outputs over time. Data is collected locally from the input or output pins at the schedule specified in the pin configuration. Each day at midnight, the local data is pushed to Digi Axess, which can be reviewed in the Automation Control Log.

You can view the data as an event list or in a detailed view.

Before you begin

The input pins and/or the output pins must be configured to collect and log the data from the pin.

• Configure input pins on the Z45 Controller

• Configure output pins on a Z45 Controller

Note Configuring application logging is one step in a larger event logging process. For information about the complete process, see Application logging overview.

To view the Automation Control Log:

1. Log in to the Z45 Controller.

2. You can access the Automation Control Log using one of the following methods:

   • Quick Panel page

     1. Click Automation Log. The Automation Log page displays.

   • Applications page

     1. Click Admin Main.

     2. From the Options section, click Applications. The User Applications page displays.

     3. Click Automation Log. The Automation Log page displays.

3. Click Events to review the automation control events that are local to the device.

   The local data from the Z45 Controller device that was pushed to Digi Axess at midnight displays. The data is everything that was collected locally for the previous day. The events are listed in chronological order, starting at midnight the previous day.

   • Click the time blocks beneath the events window to quickly move through the events list.

   • Click Delete at the bottom of the page to clear the data from the event log.

4. Click Detailed to view a more detailed view of the local data from the Z45 Controller device.

   • Click Delete at the bottom of the page to clear the data from the event log.