Clear Connect Sensor sensor data

You can clear all of the Connect Sensor sensor data stored in Digi Axess.

This feature is useful if you have changed the sensor connected to a pin on the Connect Sensor, and you want to see only data for the sensors that are currently connected to the device.

Note Once deleted, the sensor data cannot be recovered.

Note As an alternative, you can also delete Connect Sensor sensor data from the Device Management section from the Admin menu. See Clear historical sensor data from a device.

To configure servers and the group ID:

1. Log into the Connect Sensor web UI on Digi Axess.

2. In the Services section, click Options. The Available Tools buttons display.
   

3. Click Clear Sensor Data. The Clear Sensor Data page displays.

4. Click Clear sensor data. A confirmation dialog displays.

5. Click OK to complete the process.