Clear historical sensor data from a device

You can clear the historical sensor data for a selected device from the Admin menu.

This feature is useful if you have changed the sensor connected to a pin on a device, and you want to see only data for the sensors that are currently connected to the device.

• Connect Sensor+: All of the historical sensor data is deleted.

  Note As an alternative, you can also delete Connect Sensor+ sensor data from the Connect Sensor+ web UI. See Clear Connect Sensor sensor data.

• Z45 Controller: All sensor data prior to the current day is deleted.

Note Once deleted, the sensor data cannot be recovered.

1. Access the Digi Axess Admin page. You must have Admin or Device User privileges to access this page.

2. From the Device Management section in the Admin dashboard, click Change next to Devices. As an alternative, you can click Devices from the dashboard pane on the left of the screen.

   The Devices page displays.

3. Search for the device for which you want to clear sensor data. You can limit the list by selecting a model or the devices in a particular device group, or by using the search feature. You can combine the search methods.

   • Model: Select a model option from the Model list box and click Search.

   • Device Groups: Select a device group form the Device Groups list box and click Search.

   • Search field: Enter a search term in the search field and then click Search.

4. Click the Serial Number link to display detailed information about the device.

5. Click Clear Sensor Data. The Confirm Clear Sensor Data page displays.

6. Review the messages, and then click Confirm to clear the sensor data. You are returned o the Devices page for the device. A green banner displays the message: Device Sensor Data Cleared.